Home › Engine / Hybrid System › FA20 INTAKE / EXHAUST › EXHAUST PIPE
RM2090E _51 Engine / Hybrid System _060669 FA20 INTAKE / EXHAUST _0297518 EXHAUST PIPE A

FA20 INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

a.
A278294

Disengage the 7 clips and remove the 12 bolts and No. 1 engine under cover.


Hide 51442E 2.REMOVE NO. 2 ENGINE UNDER COVER

a.
A278295

Remove the 7 bolts and the No. 2 engine under cover.


Hide 17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A277952

Remove the 2 nuts and disconnect the exhaust joint pipe.


b.
A277953

Remove the 2 nuts and the 2 bolts.


c.

Remove the 2 compression springs and disconnect the center exhaust pipe assembly.


d.
A277954

Remove the bolt and the front exhaust pipe assembly.


e.

Remove the 2 gaskets.


Hide 17420 4.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.
A277955

Remove the 2 nuts and 2 bolts, and disconnect the tail exhaust pipe assembly.


b.
A277956

Remove the cushion rubber and the center exhaust pipe assembly.


c.

Remove the gasket.


Hide 17430 5.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
C262505

Remove the 4 cushion rubbers and the tail exhaust pipe assembly.


Hide 17448 6.REMOVE TAIL PIPE BAFFLE (w/ Rear Spoiler)

a.

Remove the 2 bolts and the 2 tail pipe baffles.


Hide 17401 7.REMOVE FRONT EXHAUST PIPE SUB-ASSEMBLY

a.
A276566E02
1.073,1.406 1.771,1.948 1.771,1.948 2.51,1.365 true 1.635,1.969 1.927,2.146 0.292,0.177 10 false SST

Set the SST. (See page Engine / Hybrid System>FA20 (ENGINE CONTROL)>IGNITION COIL AND SPARK PLUG>REMOVAL)

SST
09250-53010  


b.

Remove the rope that is tying the joint pipe to the front suspension cross member sub-assembly.


c.

Remove the exhaust joint pipe.