1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
62311B
2.SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
67913
3.REMOVE FRONT DOOR SCUFF PLATE RH
71460S
4.REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
64721
5.SEPARATE LUGGAGE COMPARTMENT INNER TRIM COVER RH
64714D
6.REMOVE LUGGAGE COMPARTMENT TRIM COVER RH
89570A
7.REMOVE FUEL PUMP CONTROL ECU ASSEMBLY
Disconnect the fuel pump control ECU assembly connector.
Remove the nut.
Push in the fuel pump control ECU assembly stud bolt.
| *1 | Stud Bolt |
| *2 | Bracket |
Move the fuel pump control ECU assembly towards the rear of the vehicle, disengage the bracket, and remove the fuel pump control ECU assembly.
Do not reuse the fuel pump control ECU assembly if it has been subjected to shocks.