Home › Engine / Hybrid System › FA20 EMISSION CONTROL › PURGE VALVE › 2012.03–2016.06
RM2090E _51 Engine / Hybrid System _060668 FA20 EMISSION CONTROL _0297511 PURGE VALVE A

FA20 EMISSION CONTROL  PURGE VALVE  INSTALLATION  


PROCEDURE

Hide 17650 1.INSTALL PURGE VALVE

a.

Connect the joint wire harness to the purge valve.


b.

Connect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose, and install the purge valve with the joint wire harness.


c.

Connect the manifold absolute pressure sensor connector.


d.

Connect the purge valve connector.


e.

Install the nut and purge valve.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)


Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY