Home › Engine / Hybrid System › FA20 EMISSION CONTROL › PURGE VALVE › 2012.03–2016.06
RM2090E _51 Engine / Hybrid System _060668 FA20 EMISSION CONTROL _0297511 PURGE VALVE A

FA20 EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Air Conditioning System)

Hide 17650 2.REMOVE PURGE VALVE

a.
A279732

Remove the nut which holds the purge valve onto the intake manifold.


b.

Disconnect the purge valve connector.


c.
A279733E02
1.563,0.365 0.417,0.313 true 0.417,0.677 1.375,1.5 true 0.208,0.219 0.365,0.396 0.156,0.177 10 false *1 0.219,0.573 0.375,0.75 0.156,0.177 10 false *2

Disconnect the manifold absolute pressure sensor connector.


d.

Disconnect the No. 2 ventilation hose.

Text in Illustration
*1 air pressure sensor assembly connector
*2 No. 2 ventilation hose


e.
A279734E03
1.948,0.552 2.042,0.25 true 2.156,0.969 2.542,0.958 true 0.896,1.01 1.573,0.979 true 1.792,1.458 1.708,0.99 true 2.594,0.865 2.75,1.042 0.156,0.177 10 false *3 0.698,0.938 0.854,1.115 0.156,0.177 10 false *2 1.719,1.5 1.875,1.677 0.156,0.177 10 false *1 2,0.063 2.156,0.24 0.156,0.177 10 false *4

Disconnect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose, and remove the purge valve with the joint wire harness.

Text in Illustration
*1 No. 1 fuel vapor feed hose
*2 No. 2 fuel vapor feed hose
*3 Joint wire harness
*4 purge valve


f.
A279735

Remove the joint wire harness from the purge valve assembly.