Home › Engine / Hybrid System › FA20 COOLING › THERMOSTAT(for Engine Coolant)
RM2090E _51 Engine / Hybrid System _060670 FA20 COOLING _0297523 THERMOSTAT(for Engine Coolant) A

FA20 COOLING  THERMOSTAT(for Engine Coolant)  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new thermostat gasket to the thermostat.


b.

Install the thermostat to the water outlet.


Hide 16331 2.INSTALL WATER OUTLET

a.

Install the water outlet with the 2 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)


Hide 16572 3.CONNECT OUTLET RADIATOR HOSE

a.

Since the radiator hose must be attached in the correct position, apply match marks before removing it.


b.

Connect the outlet radiator hose to the water outlet with the hose clamp.