Home › Engine / Hybrid System › FA20 INTAKE / EXHAUST › EXHAUST MANIFOLD
RM2090E _51 Engine / Hybrid System _060669 FA20 INTAKE / EXHAUST _0297517 EXHAUST MANIFOLD A

FA20 INTAKE / EXHAUST  EXHAUST MANIFOLD  INSTALLATION  


PROCEDURE

Hide 17141 1.INSTALL EXHAUST MANIFOLD

a.

Install 2 new gaskets.


b.

Install the exhaust manifold with the 6 new nuts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)

NOTICE:

Do not reuse the nuts.



c.

Install new gasket to the exhaust manifold.


d.

Install 2 new nuts and the front exhaust pipe sub-assembly.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)