Home › Engine / Hybrid System › FA20 STARTING › STARTER(for Automatic Transmission)
RM2090E _51 Engine / Hybrid System _060672 FA20 STARTING _0297538 STARTER(for Automatic Transmission) A

FA20 STARTING  STARTER(for Automatic Transmission)  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 28100 4.REMOVE STARTER ASSEMBLY

a.
A280965

Remove the nut and disconnect the starter wire.


b.

Disconnect the starter connector.


c.
A398075

Disengage the wire clamp.


d.
A280967

Remove the upper side bolt.


e.
A285321

Remove the bolt and disconnect the ground cable.

NOTICE:

Hold the battery cable stay when removing the bolt.



f.
A277913

Remove the lower side bolt, battery cable stay and starter assembly.