Home › Drivetrain › TX6A (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION WIRE
RM2090E _52 Drivetrain _060674 TX6A AUTOMATIC TRANSMISSION / TRANSAXLE _0297544 TRANSMISSION WIRE A

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE  REMOVAL  


PROCEDURE

Hide 35106 2.REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

a.
C256218

Remove the 20 bolts, automatic transmission oil pan sub-assembly and the automatic transmission oil pan gasket.

NOTICE:

Some fluid will remain in the automatic transmission oil pan sub-assembly. Remove all the bolts and carefully remove the automatic transmission oil pan sub-assembly.



Hide 35394 3.REMOVE TRANSMISSION OIL CLEANER MAGNET

a.
C109359E04
2.311,0.344 2.492,0.563 0.180,0.219 10 *1 1.004,0.605 1.004,0.449 1.004,0.449 2.26,0.449 false 2.114,1.103 2.115,0.449 false 1.395,0.985 1.395,0.449 false

Remove the 3 transmission oil cleaner magnets from the automatic transmission oil pan sub-assembly.

Text in Illustration
*1 Transmission Oil Cleaner Magnet


b.
AT00103

Examine the particles in the automatic transmission oil pan sub-assembly.

i.

Collect any steel chips with the removed transmission oil cleaner magnets. Carefully inspect the foreign matter and particles in the automatic transmission oil pan sub-assembly and on the transmission oil cleaner magnets to anticipate the type of wear you will find in the automatic transmission assembly.

Steel (magnetic): bearing, gear and clutch plate wear

Brass (non-magnetic): bush wear



Hide 35330 4.REMOVE VALVE BODY OIL STRAINER ASSEMBLY

a.
C258476

Remove the 4 bolts and the valve body oil strainer assembly.

NOTICE:

Be careful as some fluid will come out of the valve body oil strainer assembly.



b.
C258477E01
0.997,1.238 1.872,1.771 false 1.894,1.725 2.059,1.899 0.165,0.174 10 *1

Remove the O-ring from the valve body oil strainer assembly.

Text in Illustration
*1 O-ring


Hide 82125 5.DISCONNECT TRANSMISSION WIRE

a.
C231586

Remove the bolt and the temperature sensor clamp.


b.

Separate the ATF temperature sensor.


c.
C257575

Remove the bolt and the valve body wire harness clamp.


d.

Disengage the wire harness clamp.


e.
C122840

Disconnect the 9 solenoid valve connectors.


Hide 82125 6.REMOVE TRANSMISSION WIRE

a.
U117400

Disconnect the transmission wire connector.

HINT:

Disengage the claw, press down the lever, and disconnect the transmission wire connector.



b.
C099927

Remove the bolt and pull out the transmission wire.


c.
C101505E12
1.396,0.594 1.177,0.594 false 0.979,0.51 1.229,0.708 0.25,0.198 10 false *1

Remove the O-ring from the transmission wire.

Text in Illustration
*1 O-ring