35410
1.INSTALL TRANSMISSION VALVE BODY ASSEMBLY
Install the check ball body and the compression spring.
| *1 | Check Ball Body and Compression Spring |
| *2 | Accumulator Piston |
Check the accumulator pistons, check ball body and the compression spring shown in the illustration.
Connect the manual valve connecting rod sub-assembly to the manual valve lever sub-assembly.
Install the transmission valve body assembly with the 19 bolts.
| Bolt | Bolt Length |
|---|---|
| A | 25 mm (0.984 in.) |
| B | 36 mm (1.42 in.) |
| C | 45 mm (1.77 in.) |
| D | 50 mm (1.97 in.) |
Install the detent spring and the detent spring cover with the bolt.
82125
2.CONNECT TRANSMISSION WIRE
3.INSTALL VALVE BODY OIL STRAINER ASSEMBLY
4.INSTALL TRANSMISSION OIL CLEANER MAGNET
5.INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
17401
6.INSTALL FRONT EXHAUST PIPE ASSEMBLY
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8.ADD AUTOMATIC TRANSMISSION FLUID LEVEL
9.INSPECT AUTOMATIC TRANSMISSION FLUID LEVEL
10.RESET CHECK RESET MEMORY
11.INSPECT EXHAUST GAS LEAK