Home › Drivetrain › TX6A (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL COOLER
RM2090E _52 Drivetrain _060674 TX6A AUTOMATIC TRANSMISSION / TRANSAXLE _0297547 OIL COOLER A

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE  OIL COOLER  INSTALLATION  


PROCEDURE

Hide 33490F 1.INSTALL TRANSMISSION OIL COOLER ASSEMBLY

a.

Install the transmission oil cooler to the transmission oil cooler bracket with the 2 bolts.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


b.

Connect the 2 new oil cooler hoses to the transmission oil cooler with the 2 hose clamps.


c.

Install the transmission oil cooler with the 3 bolts.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 2.CONNECT WATER BY-PASS HOSE

a.

Connect the 2 water by-pass hoses to the transmission oil cooler with the 2 hose clamps.


Hide 32943B 3.CONNECT TRANSMISSION OIL COOLER HOSE

a.

Connect the 2 oil cooler hoses with the 2 hose clamps.


b.
C264502E03
1.948,1.417 1.75,1.833 1.75,1.833 1.542,1.146 true 1.646,1.844 1.896,2.063 0.25,0.219 10 true *a

Install the clip as shown in the illustration.

Text in Illustration
*a Paint Mark


Hide 7.INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK