Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(for RHD)
RM2090E _52 Drivetrain _060675 CLUTCH _0297563 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  REMOVAL  


PROCEDURE

Hide 73900 2.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 3.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

a.
C258490

Remove the clip and the clevis pin, and separate the clutch master cylinder push rod clevis from the clutch pedal sub-assembly.


Hide 31410 4.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C258503

Remove the union bolt, 2 gaskets and the master cylinder to the release cylinder hose from the clutch release cylinder assembly.

HINT:

Use a container to collect the fluid.



b.
C257594

Remove the 2 nuts, the clutch master cylinder assembly, and the clutch flexible hose bracket.


c.

Remove the sheet from the clutch master cylinder assembly.


Hide 31481 5.REMOVE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

a.
C257595

Using a union nut wrench (10 mm), disconnect the clutch master cylinder to flexible hose tube from the master cylinder to release cylinder hose.

HINT:

Use a container to collect the fluid.



b.

Remove the clip and the clutch flexible hose bracket.


c.

Using a union nut wrench (10 mm), remove the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.