Home › Drivetrain › CLUTCH › CLUTCH UNIT
RM2090E _52 Drivetrain _060675 CLUTCH _0297565 CLUTCH UNIT A

CLUTCH  CLUTCH UNIT  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C258506

Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transmission assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
C262732

Disengage the 2 release bearing hub clips and remove the clutch release bearing assembly from the clutch release fork sub-assembly.


Hide 31232A 4.REMOVE RELEASE BEARING HUB CLIP

a.

Remove the 3 release bearing hub clips from the clutch release bearing assembly.


Hide 5.CLEAN CLUTCH RELEASE FORK SUB-ASSEMBLY AND CLUTCH RELEASE BEARING ASSEMBLY

a.

Clean the clutch release fork sub-assembly and clutch release bearing assembly.


Hide 31126 6.REMOVE CLUTCH RELEASE FORK BOOT

a.
C258507

Remove the clutch release fork boot from the manual transmission assembly.


Hide 31236B 7.REMOVE RELEASE FORK SUPPORT

a.
C258508

Remove the release fork support from the manual transmission assembly.


Hide 31210 8.REMOVE CLUTCH COVER ASSEMBLY

a.
C258509E01
0.503,0.659 0.671,0.829 0.168,0.171 10 *a 1.022,1.039 0.715,0.765 0.715,0.765 0.928,1.042 false

Put the matchmarks on the clutch cover assembly and the flywheel sub-assembly.

Text in Illustration
*a Matchmark


b.

Loosen the 6 bolts one turn at a time until spring tension is released.


c.

Remove the 6 bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 9.REMOVE CLUTCH DISC ASSEMBLY

a.

Remove the clutch disc assembly.

NOTICE:

Keep the lining part of the clutch disk and the surfaces of the pressure plate and flywheel free of oil and foreign matter.