Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM2090E _53 Suspension _060681 REAR SUSPENSION _0297609 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEELS

Hide 89408C 2.SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ HID Headlight System)

Hide 48802 3.REMOVE STABILIZER LINK SUB-ASSEMBLY (for LH Side)

a.
C256612

Remove the bolt, nut and separate the stabilizer link sub-assembly from the rear No. 2 suspension arm assembly LH.


b.
C262302

Using a socket hexagon 5 mm, hold the stud bolt and remove the nut and stabilizer link sub-assembly from the rear stabilizer bar.

HINT:

Using a socket hexagon wrench 5 mm to hold the stud.



Hide 48802 4.REMOVE STABILIZER LINK SUB-ASSEMBLY (for RH Side)

HINT:

Use the same procedure described for the LH side.


Hide 48824R 5.REMOVE REAR STABILIZER BRACKET (for LH Side)

a.
C256609

Remove the 2 bolts and rear stabilizer bracket.


Hide 48824R 6.REMOVE REAR STABILIZER BRACKET (for RH Side)

HINT:

Use the same procedure described for the LH side.


Hide 48812 7.REMOVE REAR STABILIZER BAR

a.

Remove the 2 rear stabilizer bushings and the rear stabilizer bar.


Hide 48805A 8.REMOVE REAR STABILIZER BAR BUSHING (for LH Side)

a.

Remove the rear stabilizer bar bushing from the rear stabilizer bar.


Hide 48805A 9.REMOVE REAR STABILIZER BAR BUSHING (for RH Side)

HINT:

Use the same procedure described for the LH side.