Use the same procedure for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55606
2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55606
3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
55449D
4.REMOVE SWITCH BASE
84840D
5.REMOVE TIRE PRESSURE WARNING RESET SWITCH
Disengage the 2 claws and remove the tire pressure warning reset switch.