84720J
1.INSTALL PATTERN SELECT SWITCH ASSEMBLY
Install the 2 screws and the pattern select switch assembly to the shifting hole cover sub-assembly.
Connect the pattern select switch assembly connector clamp. (for Automatic Transmission)
Connect the pattern select switch assembly connector.
58808
2.INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transmission)
33504F
3.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
58808
4.INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission)
33504F
5.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)