Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER
RM2090E _54 Brake _060688 PARKING BRAKE _0297638 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 84550 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

a.

Install the parking brake switch assembly with the screw.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


Hide 46210 2.INSTALL PARKING BRAKE LEVER ASSEMBLY

a.

Install the parking brake lever assembly with the 3 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Connect the parking brake switch assembly connector.


Hide 46410 3.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

a.

Temporarily install the NO. 1 parking brake cable assembly to the parking brake lever with the adjusting nut.


b.

Install the NO. 2 parking brake cable assembly and NO. 3 to the NO. 1 parking brake cable assembly.


Hide 4.INSPECT PARKING BRAKE LEVER TRAVEL

Hide 5.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 58810J 6.INSTALL CONSOLE BOX ASSEMBLY