1. PRECAUTION
Be sure to read Precaution thoroughly before servicing (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>PRECAUTION).
89658
2.INSTALL POWER STEERING ECU BRACKET (for LHD)
Install the power steering ECU bracket with 4 screws.
89650
3.INSTALL POWER STEERING ECU ASSEMBLY (for LHD)
Install the power steering ECU with the 2 bolts.
Engage the clamp.
Connect the 3 connectors to the power steering ECU assembly.
Connect the connector to the power steering ECU assembly.
As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.
| *a | Return the lock lever |
| *b | Push the lock |
Engage the clamp.
89658
4.INSTALL POWER STEERING ECU BRACKET (for RHD)
Install the power steering ECU bracket with 4 screws.
89650
5.INSTALL POWER STEERING ECU ASSEMBLY (for RHD)
Install the power steering ECU assembly with the 2 bolts.
Connect the 3 connectors to the power steering ECU assembly.
Connect the connector to the power steering ECU assembly.
As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.
| *a | Return the lock lever |
| *b | Push the lock |
Engage the clamp.
82730
6.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
7. ROTATION ANGLE SENSOR INITIALIZATION AND TORQUE SENSOR ZERO POINT CALIBRATION