Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86211
1.INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket to the radio receiver assembly with the 4 screws.
86212
2.INSTALL NO. 2 RADIO BRACKET
Use the same procedure as for the No. 1 radio bracket.
3.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
Connect each connector.
Install the radio receiver assembly with bracket with the 4 bolts.
55405B
4.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY