Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL › 2012.03–2016.06
RM2090E _58 Vehicle Interior _060706 INTERIOR PANELS / TRIM _0297756 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  INSTALLATION  


PROCEDURE

Hide 55303B 1.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

a.

Connect the connectors.


b.

Engage the 12 claws and clamp.


c.

Connect the aspirator pipe from the air conditioning unit assembly (for LHD with Automatic Air Conditioning System).


d.

Install the lower instrument panel sub-assembly with the 2 screws and nut.


Hide 55557C 2.INSTALL GLOVE COMPARTMENT DOOR DAMPER

a.

Engage the claw to install the glove compartment door damper.


Hide 55550 3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

a.

Horizontally engage the 2 hinges of the outer glove compartment door.

NOTICE:

Make sure to install the glove compartment door assembly hinges horizontally.



b.

Engage the 2 stoppers to install the glove compartment door assembly.


c.

Engage the claw to install the glove compartment door damper.


Hide 55607 4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

a.

for LHD

i.

Engage the 3 claws and 4 clips and install the No. 2 instrument panel under cover sub-assembly.



b.

for RHD

i.

Engage the 3 claws and 4 clips.


ii.

Connect the cooler thermistor hose and connector and install the No. 2 instrument panel under cover sub-assembly.



Hide 55606 5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

Hide 55422 6.INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

a.

Connect the connector.


b.

Engage the 2 claws that are holding the upper instrument panel meter ornament and steering column cover together.


c.

Engage the 2 clips and 6 claws.


d.

Install the upper instrument panel meter ornament with the screw.


Hide 55403 7.INSTALL METER HOOD SUB-ASSEMBLY

a.

Engage the 12 claws.


b.

Install the meter hood sub-assembly with the screw.


Hide 55317A 8.INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

a.

Connect the connector.


b.

Engage the 4 clips and claw to install the instrument side panel RH.


Hide 55317A 9.INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

a.

Engage the 4 clips and claw to install the instrument side panel RH.


Hide 55318C 10.INSTALL INSTRUMENT SIDE PANEL LH

HINT:

Use the same procedure as for the RH side.


Hide 55900 11.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 55900 12.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)

Hide 55900 13.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/o Air Conditioning System)

HINT:

Use the same procedure as for the manual air conditioning system.


Hide 55045C 14.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LH Side)

a.

Engage the 3 claws.


b.

Install the upper instrument panel finish panel sub-assembly with the screw.


Hide 55475A 15.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

a.

Engage the 6 claws.


b.

Install the No. 2 instrument cluster finish panel garnish with the screw.


Hide 55044B 16.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 55474C 17.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

HINT:

Use the same procedure as for the No. 2 instrument cluster finish panel garnish.


Hide 18.INSTALL STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)

a.

Install the stereo opening cover with bracket with the 4 screws.


Hide 19.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

Hide 55405B 20.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

a.

Engage the 4 clips and 2 claws to install the center instrument cluster finish panel sub-assembly.


Hide 58810J 21.INSTALL CONSOLE BOX ASSEMBLY

Hide 22.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)