Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO ANTENNA CORD
RM2090E _56 Audio / Visual / Telematics _060692 AUDIO / VIDEO _0297655 RADIO ANTENNA CORD A

AUDIO / VIDEO  RADIO ANTENNA CORD  REMOVAL  


PROCEDURE

Hide 1.REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (for Automatic Air Conditioning System)

Hide 2.REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (for Manual Air Conditioning System)

Hide 3.REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (w/o Air Conditioning System)

HINT:

Use the same procedure as for the manual air conditioning system.


Hide 63310 4.REMOVE ROOF HEADLINING ASSEMBLY

Hide 86101 5.REMOVE ANTENNA CORD SUB-ASSEMBLY

a.
E247980

Peel back the floor carpet LH side.


b.
E252488

Disconnect the connector.


c.

Disengage the 10 clamps and remove the antenna cord sub-assembly.


Hide 86101J 6.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

a.

Remove the 5 adhesive tapes.


b.

Disengage the 2 clamps and remove the No. 2 antenna cord sub-assembly from the roof headlining.

E247238

Text in Illustration
V100155

Adhesive Tape - -