Take extra care when handling these precision electronic components.
89751A
1.REMOVE TRANSMITTER HOUSING COVER
Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
| *1 | Protective Tape |
Do not use excessive force when prying apart the housing cover.
89071B
2.REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly.
| *1 | Protective Tape |
3.REMOVE DOOR CONTROL TRANSMITTER PACKING
Remove the door control transmitter packing.
89745A
4.REMOVE TRANSMITTER BATTERY