Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicle.
84052
1.INSTALL UN-LOCK WARNING SWITCH ASSEMBLY
Attach the 2 claws to install the un-lock warning switch assembly.
Connect the un-lock warning switch assembly connector.
45286
2.INSTALL UPPER STEERING COLUMN COVER
3.INSTALL LOWER STEERING COLUMN COVER
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55606
5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
55422
6.INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT
55403
7.INSTALL METER HOOD SUB-ASSEMBLY
55461A
8.INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
55405B
9.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
55318C
10.INSTALL INSTRUMENT SIDE PANEL LH