55303B
1.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Connect the connectors.
Engage the 12 claws and clamp.
Connect the aspirator pipe from the air conditioning unit assembly (for LHD with Automatic Air Conditioning System).
Install the lower instrument panel sub-assembly with the 2 screws and nut.
55557C
2.INSTALL GLOVE COMPARTMENT DOOR DAMPER
Engage the claw to install the glove compartment door damper.
55550
3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Horizontally engage the 2 hinges of the outer glove compartment door.
Make sure to install the glove compartment door assembly hinges horizontally.
Engage the 2 stoppers to install the glove compartment door assembly.
Engage the claw to install the glove compartment door damper.
55607
4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
for LHD
Engage the 3 claws and 4 clips and install the No. 2 instrument panel under cover sub-assembly.
for RHD
Engage the 3 claws and 4 clips.
Connect the cooler thermistor hose and connector and install the No. 2 instrument panel under cover sub-assembly.
55606
5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
55422
6.INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT
Connect the connector.
Engage the 2 claws that are holding the upper instrument panel meter ornament and steering column cover together.
Engage the 2 clips and 6 claws.
55403
7.INSTALL METER HOOD SUB-ASSEMBLY
Engage the 12 claws.
Install the meter hood sub-assembly with the screw.
55317A
8.INSTALL INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)
Connect the connector.
Engage the 4 clips and claw to install the instrument side panel RH.
55317A
9.INSTALL INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)
Engage the 4 clips and claw to install the instrument side panel RH.
55318C
10.INSTALL INSTRUMENT SIDE PANEL LH
Use the same procedure as for the RH side.
55900
11.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55900
12.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)
55900
13.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/o Air Conditioning System)
Use the same procedure as for the manual air conditioning system.
55045C
14.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LH Side)
Engage the 3 claws.
Install the upper instrument panel finish panel sub-assembly with the screw.
55475A
15.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Engage the 6 claws.
Install the No. 2 instrument cluster finish panel garnish with the screw.
55044B
16.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
55474C
17.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Use the same procedure as for the No. 2 instrument cluster finish panel garnish.
18.INSTALL STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)
Install the stereo opening cover with bracket with the 4 screws.
19.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
55461A
20.INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
Engage the 8 clips and 2 claws to install the instrument panel ornament.
55405B
21.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
Engage the 3 clips and 3 claws to install the center instrument cluster finish panel sub-assembly.
58810J
22.INSTALL CONSOLE BOX ASSEMBLY
23.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL