Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › 2012.03–2016.06
RM2090E _58 Vehicle Interior _060699 METER / GAUGE / DISPLAY _0297697 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the connector.


b.

Engage the 2 clips to install the combination meter assembly.


c.

Install the 2 screws.


Hide 55422 2.INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

Hide 55405B 4.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 5.REGISTER ECU CODE (w/o Entry and Start System)

a.

Register the ECU code (Refer to the Service Bulletin).