Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
83100
1.INSTALL COMBINATION METER ASSEMBLY
Connect the connector.
Engage the 2 clips to install the combination meter assembly.
Install the 2 screws.
55422
2.INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT
55403
3.INSTALL METER HOOD SUB-ASSEMBLY
55461A
4.INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
55405B
5.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
6.REGISTER ECU CODE (w/o Entry and Start System)
Register the ECU code (Refer to the Service Bulletin).