Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55461A
1.REMOVE INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
55405B
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
55403
3.REMOVE METER HOOD SUB-ASSEMBLY
55422
4.REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT
83100
5.REMOVE COMBINATION METER ASSEMBLY
Remove the 2 screws.
Disengage the 2 clips.
Disconnect the connector and remove the combination meter assembly.