Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
71470S
1.REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY
67914
2.REMOVE FRONT DOOR SCUFF PLATE
62312B
3.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover.
64715D
4.REMOVE LUGGAGE COMPARTMENT TRIM COVER
62606A
5.REMOVE QUARTER TRIM LID SUB-ASSEMBLY
62462A
6.REMOVE REAR WINDOW SIDE GARNISH
73370
7.REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.
Remove the bolt A.
Loosen the bolt B and remove the rear seat 3 point type outer belt assembly.