88460
1.INSTALL COOLER CONDENSER ASSEMBLY
Install the cooler condenser assembly with the 4 bolts.
Do not damage the condenser or radiator when installing the condenser.
Connect the external air temperature sensor clamp and connector.
88790E
2.CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
Remove the attached vinyl tape from the tube and the connecting part of the cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.
ND-OIL 8 or equivalent
ND-OIL 12 or equivalent
Install the O-ring on the air conditioner tube and accessory assembly.
Install the air conditioner tube and accessory assembly on the cooler condenser assembly with the bolt.
88711
3.CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the attached vinyl tape from the pipe and the connecting part of the cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pipe joint.
ND-OIL 8 or equivalent
ND-OIL 12 or equivalent
Install the O-ring on the No. 1 cooler refrigerant discharge hose.
Install the No. 1 cooler refrigerant discharge hose on the cooler condenser assembly with the bolt.
52119A
4.INSTALL FRONT BUMPER COVER
5. CHARGE WITH REFRIGERANT
for HFC-134a (R134a):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFC-134a(R134a))>REPLACEMENT)
for HFO-1234yf (R1234yf):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT)
6.WARM UP ENGINE
for HFC-134a (R134a):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFC-134a(R134a))>REPLACEMENT)
for HFO-1234yf (R1234yf):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT)
7.INSPECT FOR REFRIGERANT LEAK
for HFC-134a (R134a):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFC-134a(R134a))>REPLACEMENT)
for HFO-1234yf (R1234yf):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT)