88625Q
1.INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for RHD)
Engage the 2 claws and install the cooler (room temp. sensor) thermistor.
88625Q
2.INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for LHD)
Use the same procedure as for the RHD.
55607
3.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
55312
4.INSTALL LOWER INSTRUMENT PANEL (for LHD)
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL