Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the LHD vehicle.
74222
1.REMOVE DOOR ARMREST COVER LH
67602
2.REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
3.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
84820
4.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the power window regulator master switch assembly.
| *1 | Protective Tape |