Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD)
RM2090E _59 Vehicle Exterior _060708 DOOR / HATCH _0297776 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD)  REMOVAL  


PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE LH (for LH Side)

Hide 67913 2.REMOVE FRONT DOOR SCUFF PLATE RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 62312B 3.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:

Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover LH.


Hide 62311B 4.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 5.REMOVE FRONT SEAT ASSEMBLY

Hide 71470S 6.REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH

Hide 71460S 7.REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64711 8.REMOVE LUGGAGE COMPARTMENT FLOOR MAT

Hide 64721 10.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH

a.
B314943

Disengage the 5 clips and remove the luggage compartment inner trim cover RH.


Hide 64722 11.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/ Side Marker Light)

Hide 64722 12.REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/o Side Marker Light)

Hide 64715D 13.REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

Hide 64714D 14.REMOVE LUGGAGE COMPARTMENT TRIM COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 64376A 15.REMOVE NO. 2 PACKAGE TRAY TRIM SPACER

a.
B310917

Using a clip remover, remove the 3 clips and the No. 2 package tray trim spacer.


Hide 77306C 16.REMOVE HANDLE COVER

a.
B314832E01
1.667,0.828 1.92,0.466 false 1.86,0.26 2.016,0.411 0.156,0.151 10 *1

Using a screwdriver with its tip wrapped in protective tape, disengage the claw.

Text in Illustration
*1 Protective Tape


b.
B314833

Remove the screw.


c.

Remove the handle cover as shown in the illustration.


Hide 77306 17.REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.
B314834

Peel back the floor carpet.


b.

Remove the 2 nuts and the fuel lid lock open lever sub-assembly.


c.
B314835

Disconnect the fuel lid lock control cable sub-assembly.


Hide 77035 18.REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.
B310922E01
1.088,0.735 1.191,0.897 0.103,0.163 10 1 0.121,0.691 0.224,0.854 0.103,0.163 10 2

Remove the fuel lid lock control cable sub-assembly as indicated by the arrows, in the order shown in the illustration.


b.

Using a screwdriver with its tip wrapped in protective tape, disengage the 11 clamps and remove the fuel lid lock control cable sub-assembly.

B314837E01
5.119,5.387 5.274,5.538 0.155,0.151 10 *1 6.195,5.385 6.349,5.536 0.155,0.151 10 *1 4.5,4.327 4.655,4.478 0.155,0.151 10 *1 6.789,3.028 6.944,3.179 0.155,0.151 10 *1 5.188,2.805 5.343,2.956 0.155,0.151 10 *1 6.261,1.144 6.415,1.294 0.155,0.151 10 *1 5.386,0.817 5.541,0.968 0.155,0.151 10 *1 3.732,1.206 3.887,1.357 0.155,0.151 10 *1 3.749,2.562 3.904,2.713 0.155,0.151 10 *1 3.747,3.712 3.902,3.863 0.155,0.151 10 *1 3.052,5.023 3.207,5.174 0.155,0.151 10 *1 6.452,5.098 6.283,5.37 false 5.407,5.066 5.207,5.379 false 2.798,4.828 3.024,5.085 false 3.603,3.675 3.722,3.786 false 4.792,4.029 4.586,4.31 false 6.565,2.736 6.775,3.035 false 5.433,2.611 5.263,2.806 false 6.122,1.062 6.243,1.213 false 5.253,0.795 5.369,0.877 false 4.18,0.91 3.896,1.269 false 3.576,2.775 3.764,2.671 false

Text in Illustration
*1 Fuel Lid Lock Control Cable Sub-Assembly - -