Use the same procedure for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
85192
1.REMOVE WINDSHIELD WIPER ARM COVER
2.REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH
3.REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
53866J
4.REMOVE FRONT FENDER TO COWL SIDE SEAL RH
53867H
5.REMOVE FRONT FENDER TO COWL SIDE SEAL LH
Use the same procedure as for the RH side.
55781
6.REMOVE COWL VENTILATOR LOUVER
85035
7.REMOVE WASHER NOZZLE SUB-ASSEMBLY
Disengage the 2 claws and separate the washer nozzle sub-assembly.
Remove the washer nozzle sub-assembly from the washer hose.