Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
81220
1.INSTALL FOG LIGHT ASSEMBLY
Engage the clip to install the fog light assembly.
Install the 2 screws.
Connect the connector.
2.INSTALL FRONT FENDER LINER
Install the fender liner with the 3 clips.
Install the bolt.
3. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT
4. PREPARE FOR FOG LIGHT AIMING
5.INSPECT FOG LIGHT AIMING
6.ADJUST FOG LIGHT AIMING