Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY › 2012.03–2016.06
RM2090E _59 Vehicle Exterior _060711 LIGHTING (EXT) _0297800 FRONT TURN SIGNAL LIGHT ASSEMBLY A

LIGHTING (EXT)  FRONT TURN SIGNAL LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81510B 1.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the front turn signal light socket.


b.
E249685

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.


Hide 81520 2.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY

a.

Engage the 2 claws to install the front turn signal light assembly.


b.

Install the 2 nuts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 52119A 4.INSTALL FRONT BUMPER COVER

Hide 5. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light)

Hide 6. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light)

Hide 7.INSPECT FOG LIGHT AIMING (w/ Fog Light)

Hide 8.ADJUST FOG LIGHT AIMING (w/ Fog Light)