Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › 2012.03–2015.04
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297829 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL FRONT SPOILER RETAINER LH (for Sport Package)

a.
B312995

Slide the front spoiler retainer LH as shown in the illustration to install it.

HINT:
U190283E01
3.017,0.357 3.190,0.525 0.173,0.168 10 *a 3,0.488 2.469,0.631 false 1.07,1.532 1.247,1.701 0.177,0.170 10 *1 1.282,1.605 1.601,1.184 false 1.212,0.39 1.421,0.580 0.210,0.190 10 *b 1.33,0.579 1.561,1.003 false

Align the front spoiler retainer LH in the position shown in the installation.


Text in Illustration
*1 Front Spoiler Retainer LH
*a Edge of the Front Bumper Cover
*b Matchmark


b.
B312983

Install the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 2.INSTALL FRONT SPOILER RETAINER RH (for Sport Package)

HINT:

Use the same procedure as for the LH side.


Hide 3.INSTALL FRONT SPOILER COVER LH (for Sport Package)

a.

Clean the front bumper cover surface.

i.

Using a heat light, heat the front bumper cover surface.


ii.

Remove the double-sided tape from the front bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install the front spoiler cover LH.

i.

Apply primer to the front spoiler cover LH attachment surface of the front bumper cover.


ii.

Using a heat light, heat the front bumper cover and the front spoiler cover LH.


iii.

Remove the peeling paper from the front spoiler cover LH.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iv.
B312946

Engage the claw and install the front spoiler cover LH.


v.
B312944

Apply thorough pressure to the sections with double-sided tape.

Text in Illustration
V100144

Double-sided Tape


vi.

Install the clip.



Hide 4.INSTALL FRONT SPOILER COVER RH (for Sport Package)

HINT:

Use the same procedure as for the LH side.


Hide 5.INSTALL FRONT SPOILER COVER (for Sport Package)

a.

Clean the front bumper cover surface.

i.

Using a heat light, heat the front bumper cover surface.


ii.

Remove the double-sided tape from the front bumper cover.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install the front spoiler cover.

i.

Apply primer to the front spoiler cover attachment surface of the front bumper cover.


ii.

Using a heat light, heat the front bumper cover and the front spoiler cover.


iii.

Remove the peeling paper from the front spoiler cover.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iv.
B312945

Engage the 8 claws and install the front spoiler cover.


v.
B312943

Apply thorough pressure to the sections with double-sided tape.

Text in Illustration
V100144

Double-sided Tape


vi.

Install the 3 clips.



Hide 52127C 6.INSTALL FRONT BUMPER HOLE COVER

a.
B312520

Engage the 4 claws to install the front bumper hole cover.


Hide 81520 7.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH

Hide 81510 8.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 81482C 9.INSTALL FOG LIGHT COVER LH

a.
B312522

Engage the 10 claws to install the fog light cover LH.


Hide 81481E 10.INSTALL FOG LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 81220 11.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 12.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 52128C 13.INSTALL FRONT BUMPER HOLE COVER LH

a.
B312518

Install the front bumper hole cover LH with the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52127D 14.INSTALL FRONT BUMPER HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 53112E 15.INSTALL NO. 1 LOWER RADIATOR GRILLE

a.
B312519

Engage the 20 claws to install the No. 1 lower radiator grille.


Hide 75311 16.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

Hide 52021 17.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B312517

Install the front bumper reinforcement sub-assembly with the 8 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 86520 18.INSTALL LOW PITCHED HORN ASSEMBLY (for China)

Hide 86510 19.INSTALL HIGH PITCHED HORN ASSEMBLY (except China)

Hide 53291B 20.INSTALL RADIATOR COVER PLATE

a.
B312516

Install the radiator cover plate with the 6 clips.


Hide 52611 21.INSTALL FRONT BUMPER ENERGY ABSORBER

a.
B312515

Install the front bumper energy absorber.


Hide 53293 22.INSTALL FRONT BUMPER STAY BRACKET

a.
B312514

Install the front bumper stay bracket with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 52129B 23.INSTALL FRONT LOWER BUMPER COVER

a.
B312513

Install the front lower bumper cover with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Install the 4 clips.


Hide 52124B 24.INSTALL FRONT BUMPER REINFORCEMENT PLATE LH

a.
B312512

Install the front bumper reinforcement plate LH with the 2 clips.


Hide 52123B 25.INSTALL FRONT BUMPER REINFORCEMENT PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 52116D 26.INSTALL NO. 2 FRONT BUMPER SIDE SUPPORT LH

a.
B312511

Engage the 2 claws.


b.
B312510

Install the No. 2 front bumper side support LH with the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52115D 27.INSTALL NO. 2 FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 53395E 28.INSTALL HOOD TO FRONT END PANEL SEAL

a.
B322369

Install the hood to front end panel seal to the front bumper upper retainer with the 13 clips.