Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
52119A
1.REMOVE FRONT BUMPER COVER
81482C
2.REMOVE FOG LIGHT COVER
81520
3.REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY
Remove the 2 nuts.
Disconnect the connector.
Disengage the 2 claws to remove the front turn signal light assembly.
81510B
4.REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the front turn signal light socket with front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the front turn signal light bulb from the front turn signal light socket and wire.