85341A
1.REMOVE HEADLIGHT CLEANER WASHER NOZZLE COVER (w/ Headlight Cleaner System)
81740
2.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/o Side Marker Light)
81730
3.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY RH (w/o Side Marker Light)
Use the same procedure described for the LH side.
81720
4.REMOVE FRONT MARKER LIGHT ASSEMBLY LH (w/ Side Marker Light)
81710
5.REMOVE FRONT MARKER LIGHT ASSEMBLY RH (w/ Side Marker Light)
Use the same procedure described for the LH side.
52521B
6.REMOVE FRONT BUMPER UPPER RETAINER
Remove the 2 clips.
Remove the 5 bolts and the front bumper upper retainer.
52119A
7.REMOVE FRONT BUMPER COVER
Put protective tape around the front bumper assembly.
| *1 | Protective Tape |
Use the same procedure for the RH and LH sides.
Remove the 7 clips.
Remove the 2 bolts.
Remove the 4 clips.
Use the same procedure for the RH and LH sides.
Remove the clip.
Use the same procedure for the RH and LH sides.
Disengage the 7 claws as indicated by the arrow in the illustration.
Use the same procedure for the RH and LH sides.
Disconnect each connector and remove the front bumper cover.