Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the LHD vehicle.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55606
2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55606
3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
81980
4.REMOVE TURN SIGNAL FLASHER ASSEMBLY
Using a clip remover, disengage the clamp.
Disconnect the connector to remove the turn signal flasher assembly.