53395E
1.REMOVE HOOD TO FRONT END PANEL SEAL
Remove the 13 clips and hood to front end panel seal from the front bumper upper retainer.
2.REMOVE LICENSE PLATE BRACKET
Type A
Remove the 2 bolts and license plate bracket.
Type B
Remove the 2 bolts and license plate bracket.
52116D
3.REMOVE NO. 2 FRONT BUMPER SIDE SUPPORT LH
Remove the screw.
Disengage the 2 claws and remove the No. 2 front bumper side support LH.
52115D
4.REMOVE NO. 2 FRONT BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52124B
5.REMOVE FRONT BUMPER REINFORCEMENT PLATE LH
Remove the 2 clips and the front bumper reinforcement plate LH.
52123B
6.REMOVE FRONT BUMPER REINFORCEMENT PLATE RH
Use the same procedure as for the LH side.
52129B
7.REMOVE FRONT LOWER BUMPER COVER
Remove the 3 bolts.
Remove the 4 clips and the front lower bumper cover.
53293
8.REMOVE FRONT BUMPER STAY BRACKET
Remove the 3 bolts and the front bumper stay bracket.
52611
9.REMOVE FRONT BUMPER ENERGY ABSORBER
Remove the front bumper energy absorber.
53291B
10.REMOVE RADIATOR COVER PLATE
Remove the 6 clips and the radiator cover plate.
86510
11.REMOVE HIGH PITCHED HORN ASSEMBLY (except China)
86520
12.REMOVE LOW PITCHED HORN ASSEMBLY (for China)
52021
13.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Remove the 8 bolts and the front bumper reinforcement sub-assembly.
75311
14.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
53112E
15.REMOVE NO. 1 LOWER RADIATOR GRILLE
Disengage the 20 claws and remove the No. 1 lower radiator grille.
52128C
16.REMOVE FRONT BUMPER HOLE COVER LH
Remove the 3 screws and the front bumper hole cover LH.
52127D
17.REMOVE FRONT BUMPER HOLE COVER RH
Use the same procedure as for the LH side.
81220
18.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
19.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
81482C
20.REMOVE FOG LIGHT COVER LH
Disengage the 10 claws and remove the fog light cover LH.
81481E
21.REMOVE FOG LIGHT COVER RH
Use the same procedure as for the LH side.
81520
22.REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH
81510
23.REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52127C
24.REMOVE FRONT BUMPER HOLE COVER
Disengage the 4 claws and remove the front bumper hole cover.
25.REMOVE FRONT SPOILER COVER (for Sport Package)
Remove the 3 clips.
Unstick the double-sided tape.
|
Double-sided Tape |
Disengage the 8 claws and remove the front spoiler cover.
26.REMOVE FRONT SPOILER COVER LH (for Sport Package)
Remove the clip.
Unstick the double-sided tape.
| *A | Type A |
| *B | Type B |
|
Double-sided Tape |
Disengage the claw and remove the front spoiler cover LH.
27.REMOVE FRONT SPOILER COVER RH (for Sport Package)
Use the same procedure as for the LH side.
28.REMOVE FRONT SPOILER RETAINER LH (for Sport Package)
Remove the 2 screws.
Put a matchmark on the front bumper cover as shown in the illustration before removing the rear spoiler retainer LH.
| *a | Matchmark |
Slide the rear spoiler retainer LH as shown in the illustration and remove it.
29.REMOVE FRONT SPOILER RETAINER RH (for Sport Package)
Use the same procedure as for the LH side.