1.INSTALL FRONT SPOILER RETAINER LH (for Sport Package)
Slide the front spoiler retainer LH as shown in the illustration to install it.
Align the front spoiler retainer LH in the position shown in the installation.
| *1 | Front Spoiler Retainer LH |
| *a | Edge of the Front Bumper Cover |
| *b | Matchmark |
Install the 2 screws.
2.INSTALL FRONT SPOILER RETAINER RH (for Sport Package)
Use the same procedure as for the LH side.
3.INSTALL FRONT SPOILER COVER LH (for Sport Package)
Clean the front bumper cover surface.
Using a heat light, heat the front bumper cover surface.
Remove the double-sided tape from the front bumper cover.
Wipe off any tape adhesive residue with cleaner.
Install the front spoiler cover LH.
Apply primer to the front spoiler cover LH attachment surface of the front bumper cover.
Using a heat light, heat the front bumper cover and the front spoiler cover LH.
Remove the peeling paper from the front spoiler cover LH.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Engage the claw and install the front spoiler cover LH.
Apply thorough pressure to the sections with double-sided tape.
|
Double-sided Tape |
Install the clip.
4.INSTALL FRONT SPOILER COVER RH (for Sport Package)
Use the same procedure as for the LH side.
5.INSTALL FRONT SPOILER COVER (for Sport Package)
Clean the front bumper cover surface.
Using a heat light, heat the front bumper cover surface.
Remove the double-sided tape from the front bumper cover.
Wipe off any tape adhesive residue with cleaner.
Install the front spoiler cover.
Apply primer to the front spoiler cover attachment surface of the front bumper cover.
Using a heat light, heat the front bumper cover and the front spoiler cover.
Remove the peeling paper from the front spoiler cover.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Engage the 8 claws and install the front spoiler cover.
Apply thorough pressure to the sections with double-sided tape.
|
Double-sided Tape |
Install the 3 clips.
52127C
6.INSTALL FRONT BUMPER HOLE COVER
Engage the 4 claws to install the front bumper hole cover.
81520
7.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH
81510
8.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
81482C
9.INSTALL FOG LIGHT COVER LH
Engage the 10 claws to install the fog light cover LH.
81481E
10.INSTALL FOG LIGHT COVER RH
Use the same procedure as for the LH side.
81220
11.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
12.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
52128C
13.INSTALL FRONT BUMPER HOLE COVER LH
Install the front bumper hole cover LH with the 3 screws.
52127D
14.INSTALL FRONT BUMPER HOLE COVER RH
Use the same procedure as for the LH side.
53112E
15.INSTALL NO. 1 LOWER RADIATOR GRILLE
Engage the 20 claws to install the No. 1 lower radiator grille.
75311
16.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
52021
17.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Install the front bumper reinforcement sub-assembly with the 8 bolts.
86520
18.INSTALL LOW PITCHED HORN ASSEMBLY (for China)
86510
19.INSTALL HIGH PITCHED HORN ASSEMBLY (except China)
53291B
20.INSTALL RADIATOR COVER PLATE
Install the radiator cover plate with the 6 clips.
52611
21.INSTALL FRONT BUMPER ENERGY ABSORBER
Install the front bumper energy absorber.
53293
22.INSTALL FRONT BUMPER STAY BRACKET
Install the front bumper stay bracket with the 3 bolts.
52129B
23.INSTALL FRONT LOWER BUMPER COVER
Install the front lower bumper cover with the 3 bolts.
Install the 4 clips.
52124B
24.INSTALL FRONT BUMPER REINFORCEMENT PLATE LH
Install the front bumper reinforcement plate LH with the 2 clips.
52123B
25.INSTALL FRONT BUMPER REINFORCEMENT PLATE RH
Use the same procedure as for the LH side.
52116D
26.INSTALL NO. 2 FRONT BUMPER SIDE SUPPORT LH
Engage the 2 claws.
Install the No. 2 front bumper side support LH with the screw.
52115D
27.INSTALL NO. 2 FRONT BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
28.INSTALL LICENSE PLATE BRACKET
Type A
Install the license plate bracket with the 2 bolts.
Type B
Install the license plate bracket with the 2 bolts.
53395E
29.INSTALL HOOD TO FRONT END PANEL SEAL
Install the hood to front end panel seal to the front bumper upper retainer with the 13 clips.