Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › from 2016.06
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297829 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL FRONT BUMPER SIDE RETAINER LH

a.
B329646

Using an air riveter or a hand riveter, install the front bumper side retainer LH with 2 new rivets.


Hide 2.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 3.INSTALL FRONT BUMPER HOLE COVER

a.
B457865

Engage the 7 claws to install the front bumper hole cover (lower side).


b.
B457864

Engage the 4 claws to install the front bumper hole cover (upper side).


Hide 81482C 4.INSTALL FOG LIGHT COVER LH

a.
B457863

Engage the 10 claws to install the fog light cover LH.


Hide 81481E 5.INSTALL FOG LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 81220 6.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 7.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 52128C 8.INSTALL FRONT BUMPER HOLE COVER LH

a.
B457862

Install the front bumper hole cover LH with the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52127D 9.INSTALL FRONT BUMPER HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 53112E 10.INSTALL NO. 1 LOWER RADIATOR GRILLE

a.
B457861

Engage the 26 claws to install the No. 1 lower radiator grille.


Hide 75311 11.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

Hide 52021 12.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B312517

Install the front bumper reinforcement sub-assembly with the 8 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 86520 13.INSTALL LOW PITCHED HORN ASSEMBLY (for China)

Hide 86510 14.INSTALL HIGH PITCHED HORN ASSEMBLY (except China)

Hide 53291B 15.INSTALL RADIATOR COVER PLATE

a.
B312516

Install the radiator cover plate with the 6 clips.


Hide 52611 16.INSTALL FRONT BUMPER ENERGY ABSORBER

a.
B312515

Install the front bumper energy absorber.


Hide 53293 17.INSTALL FRONT BUMPER STAY BRACKET

a.
B312514

Install the front bumper stay bracket with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 52129B 18.INSTALL FRONT LOWER BUMPER COVER

a.
B312513

Install the front lower bumper cover with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.

Install the 4 clips.


Hide 52124B 19.INSTALL FRONT BUMPER REINFORCEMENT PLATE LH

a.
B312512

Install the front bumper reinforcement plate LH with the 2 clips.


Hide 52123B 20.INSTALL FRONT BUMPER REINFORCEMENT PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 52116D 21.INSTALL NO. 2 FRONT BUMPER SIDE SUPPORT LH

a.
B312511

Engage the 2 claws.


b.
B312510

Install the No. 2 front bumper side support LH with the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52115D 22.INSTALL NO. 2 FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 23.INSTALL LICENSE PLATE BRACKET

a.
B405807

Type A

i.

Install the license plate bracket with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)



b.
B405808

Type B

i.

Install the license plate bracket with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)



Hide 53395E 24.INSTALL HOOD TO FRONT END PANEL SEAL

a.
B322369

Install the hood to front end panel seal to the front bumper upper retainer with the 13 clips.