76871
1.INSTALL REAR SPOILER
If clips or packings are damaged, replace clips with new ones.
Hold the rear spoiler to avoid it from falling.
Clean the threads of the insert bolt on the rear spoiler.
Apply adhesive to the insert bolt.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
| *1 | Insert bolt |
| *a | Adhesive |
Engage the 2 clips to install the rear spoiler.
Install the rear spoiler with the 4 nuts.
11444
2.INSTALL HOLE PLUG
Install the 2 hole plugs.
Use the same procedure described for the LH side.
64719A
3.INSTALL LUGGAGE COMPARTMENT DOOR COVER