1.INSTALL PROTECTOR SEAL (w/ Rear Spoiler (except Sport Package))
Perform this procedure only when installation of the protector seal is necessary.
Remove one side of release paper from a new protector seal.
Align the seal hole with the locating marks on the door panel.
| *1 | Locating Mark on Door Panel |
| *2 | Seal Hole |
|
Vehicle front side |
While making the protector seal level, apply one side of the protector seal on the door panel.
Remove other side of release paper and apply the protector seal securely.
64530A
2.INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY (for LH Side)
64530A
3.INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
4.INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH CAP (w/o Lock Cylinder)
Engage the 2 claws to install the luggage compartment door outside garnish cap.
81270
5.INSTALL LICENSE PLATE LIGHT ASSEMBLY
75311
6.INSTALL RADIATOR GRILLE EMBLEM (for Rear Side)
84840G
7.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
76801A
8.INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
64660
9.INSTALL LUGGAGE CLOSER CABLE ASSEMBLY (w/ Lock Cylinder)
64650
10.INSTALL LUGGAGE DOOR CLOSER ASSEMBLY
11.INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER PACKING (w/ Lock Cylinder)
69560A
12.INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)
64459
13.INSTALL LUGGAGE COMPARTMENT DOOR CUSHION
Engage the 2 claws to install 2 new luggage compartment door cushions.
76871
14.INSTALL REAR SPOILER (except Sport Package)
76871
15.INSTALL REAR SPOILER (for Sport Package)
64719A
16.INSTALL LUGGAGE COMPARTMENT DOOR COVER (w/ Entry and Start System)
Install the luggage compartment door cover with the 7 clips.