82171
1.REMOVE NO. 1 ROOF WIRE (w/ Illumination)
w/ Rear View Monitor System
Remove the 4 adhesive tapes from the roof headlining assembly.
Disengage the 6 clamps to remove the No. 1 roof wire from the roof headlining assembly.
|
Adhesive tape | - | - |
w/o Rear View Monitor System
Remove the 5 adhesive tapes from the roof headlining assembly.
Disengage the 2 clamps and remove the No. 1 roof wire from the roof headlining assembly.
|
Adhesive tape | - | - |
82171
2.REMOVE NO. 1 ROOF WIRE (w/o Illumination)
Remove the 2 adhesive tapes from the roof headlining assembly.
Disengage the 2 guides and remove the No. 1 roof wire from the roof headlining assembly.
|
Adhesive tape | - | - |
86101J
3.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY