Home › Engine / Hybrid System › K3-VE COOLING › WATER PUMP › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002977 K3-VE COOLING _0015046 WATER PUMP A

K3-VE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL WATER PUMP ASSEMBLY

a.

Using a new gasket, install the water pump with the 3 bolts and 2 nuts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 16173 2.INSTALL WATER PUMP PULLEY

a.

Using SST, hold the water pump pulley.

SST
09960-10010  (09962-01000, 09963-00600)


b.

Install the water pump pulley with the 3 bolts.

Torque:
12 N*m (117 kgf*cm, 9 ft.*lbf)