Home › Engine / Hybrid System › K3-VE COOLING › COOLING FAN MOTOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002977 K3-VE COOLING _0015049 COOLING FAN MOTOR A

K3-VE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361 2.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16701 3.INSTALL FAN SHROUD SUB-ASSEMBLY

a.

Install the fan shroud sub-assembly with the 4 bolts (for Full wide radiator).

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.
A261285

Engage the 2 claws and install the fan shroud sub-assembly (for Narrow radiator).


c.

Connect the cooling fan motor connector and the wire harness clamp.