Home › Engine / Hybrid System › 3SZ-VE COOLING › COOLING FAN MOTOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002978 3SZ-VE COOLING _0015058 COOLING FAN MOTOR A

3SZ-VE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361 2.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16701 3.INSTALL FAN SHROUD SUB-ASSEMBLY

a.

Install the fan shroud with fan with the 4 bolts.


b.

Connect the cooling fan motor connector and the wire harness clamp.