Home › Engine / Hybrid System › 3SZ-VE COOLING › RADIATOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002978 3SZ-VE COOLING _0015056 RADIATOR A

3SZ-VE COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16400 1.INSTALL RADIATOR ASSEMBLY

a.

Install the 4 grommets onto the radiator.


b.

Install the fan shroud with fan with the 4 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Install the radiator assembly into the vehicle.


d.

Install the 2 radiator brackets with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


e.

Connect the accelerator control cable assembly to the fan shroud sub-assembly.


f.

Install the cooling fan motor connector and wire harness clamp.


Hide 32921D 2.CONNECT INLET OIL COOLER HOSE (for Automatic Transmission)

a.

Connect the inlet oil cooler hose.


Hide 32922A 3.CONNECT OUTLET OIL COOLER HOSE (for Automatic Transmission)

a.

Connect the outlet oil cooler hose.


Hide 16572 4.INSTALL OUTLET RADIATOR HOSE

a.

Connect the outlet radiator hose.


Hide 16571 5.INSTALL INLET RADIATOR HOSE

a.

Connect the inlet radiator hose with the 2 radiator hose clips.


b.

Connect the accelerator cable clamp.


Hide 16470A 6.INSTALL RADIATOR RESERVE TANK HOSE

a.

Connect the radiator reserve tank hose.


Hide 11.INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK