Home › Engine / Hybrid System › 3SZ-VE COOLING › COOLING FAN MOTOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002978 3SZ-VE COOLING _0015058 COOLING FAN MOTOR A

3SZ-VE COOLING  COOLING FAN MOTOR  REMOVAL  


PROCEDURE

Hide 16571C 2.REMOVE INLET RADIATOR HOSE

Hide 16711 3.REMOVE FAN SHROUD SUB-ASSEMBLY

a.
A262242

Disconnect the cooling fan motor connector and the wire harness clamp.


b.
A130068

Remove the 4 bolts and the fan shroud sub-assembly.


Hide 16361 4.REMOVE FAN

a.
A261289

Remove the nut and the fan.


Hide 16363 5.REMOVE COOLING FAN MOTOR

a.
A261290

Remove the 3 screws and the cooling fan motor.