31321
1.INSTALL CLUTCH PEDAL PAD
31301B
2.INSTALL NO. 1 CLUTCH PEDAL CUSHION
Install the No. 1 clutch pedal cushion onto the clutch pedal sub-assembly.
31301Q
3.INSTALL CLUTCH PEDAL SPRING BUSH
Apply MP grease to the 2 clutch pedal spring bushes.
Install the 2 clutch pedal spring bushes onto the clutch pedal sub-assembly.
31301
4.INSTALL CLUTCH PEDAL SUB-ASSEMBLY
Apply MP grease to the contact surfaces between the clutch pedal sub-assembly and clutch pedal spring, and clutch pedal spring and brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).
Install the clutch pedal spring onto the clutch pedal sub-assembly.
Connect the clutch pedal spring from the brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).
Install the clutch pedal sub-assembly onto the brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD) with the clutch pedal shaft and nut.
Hold the clutch pedal shaft and tighten the nut.
Install the clutch pedal shaft from the right side of the vehicle.
5.CONNECT CLUTCH RELEASE CABLE ASSEMBLY
Apply MP grease to the cable end and pedal hook.
Connect the end of the clutch release cable assembly to the clutch pedal sub-assembly.
31301
6.INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY
7.INSTALL INSTRUMENT PANEL LOWER COVER